Over million Products, Wholesale Price, Small Purchase Order Available, Ultra-fast Shipping

RELAB's Products around more than 30 countries and regions, including UK, Germany, Greece, Poland, USA, Canada, Korea, Japan, Indonesia, India, Russia, etc.
Flat Fan Nozzle, Full Cone Nozzle, Hollow Cone Nozzle, Straight Jet, Sprial Nozzle, Square Nozzle, Air Atomizing Nozzle, Cluster Mist, Fog Nozzle, Eductor
Nylon Tubing, PE Tubing, Threaded Coupling, Quick Coupling, Tee, Elbow, Adjustable ball, Ball valve, swivel joint, switching head, Cluster head, Adapter
Brass, Nickel Plated Brass, SUS303, SUS304, SUS316, SUS316L, PP, PVC, POM, PVDF, PTFE, Ceramic, Ruby, Tungsten Rlloy, SISIC/Silicon Carbide
Cleaning, Wahing, Cooling, Misting, Fogging, Humidifying, Coating, Planting, Spray Drying, Fuel Burning, Dust Controlling, Fire Fighting

Silicon Carbide Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Silicon Carbide Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Silicon Carbide Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Silicon Carbide Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Extral-Flow Hollow Cone Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

SiSiC Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Silicon Carbide Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Silicon Carbide Spiral Nozzle

Nozzle Descriptions:
The Spiral Jet Spray Nozzles deliver a full cone and hollow spray pattern with spiral spray angles ranging from 60  to 170 degree at 0.7 bar.
The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bar.

These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

Spiral Jet Spray Nozzles work on the impact principle, by deflection of a water stream onto a spiral profiled surface which provides the desired spray angle.

The spray angle value is maintained even at low pressure and when spraying high viscosity liquids.
These nozzles can be installed on and replaced from most pipe systems.

Available materials are in brass, 316stainless steel and TEFLON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.  
Design Features:
  * Nozzle Materials: Brass, 303, 316 stainless steel, Teflon/PTFE, PVC, PP,Ceramics,SiC
  * Nozzle Structure: one-piece construction no internal parts;
  * Spray Patterns: full cone spiral and hollow cone spiral spray;
  * Spray angles: from 60 to 170 degree;
  * Pressure Range: 0.7 to 25 bar (2.6 to 11960 L/min);
  * Inlet connection Type: 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 3", 4";
  * Thread Standard: available in type NPT or BSPT male, female and flange connection;
  * Also referred to as: Spiral Jet, Pigtail Nozzles, Twister Nozzle, Sprinkler Head, Whorl Nozzle and Twist Jet Nozzle.

SiSiC Desulphating Nozzle

Nozzle Descriptions:
The Spiral Jet Spray Nozzles deliver a full cone and hollow spray pattern with spiral spray angles ranging from 60  to 170 degree at 0.7 bar.
The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bar.

These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

Spiral Jet Spray Nozzles work on the impact principle, by deflection of a water stream onto a spiral profiled surface which provides the desired spray angle.

The spray angle value is maintained even at low pressure and when spraying high viscosity liquids.
These nozzles can be installed on and replaced from most pipe systems.

Available materials are in brass, 316stainless steel and TEFLON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.  
Design Features:
  * Nozzle Materials: Brass, 303, 316 stainless steel, Teflon/PTFE, PVC, PP,Ceramics,SiC
  * Nozzle Structure: one-piece construction no internal parts;
  * Spray Patterns: full cone spiral and hollow cone spiral spray;
  * Spray angles: from 60 to 170 degree;
  * Pressure Range: 0.7 to 25 bar (2.6 to 11960 L/min);
  * Inlet connection Type: 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 3", 4";
  * Thread Standard: available in type NPT or BSPT male, female and flange connection;
  * Also referred to as: Spiral Jet, Pigtail Nozzles, Twister Nozzle, Sprinkler Head, Whorl Nozzle and Twist Jet Nozzle.

SiSiC Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Flood Jet Spray Nozzles

Nozzle Descriptions:
Flood Jet Spray Nozzles produce a wide, flat fan jet pattern with uniform distribution and medium impact spray droplets.

They feature a precision-machined deflector surface which provides dependable, accurate control of deflection and spray angle.

The one-piece design resists clogging due to a large, unobstructed flow passage and round orifice.

Flood Jet Spray Nozzles can also be suited to spray air and steam.

Flood Jet Spray Nozzles are also available in the interchangeable tip form, and can be assembled in Uni-jet nozzle.

Design Features:
   * Nozzle Materials: 303/304 stainless steel, and brass.
   * Nozzle Structure: one-piece construction no internal filter parts.
   * Spray Patterns: Flat fan spray.
   * Spray angles: from 40 to 110 degree.
   * Pressure Range: 0.2 to 10 bar (0.44 to 60 L/min).
   * Inlet connection Type: 1/8", 3/8", 1/4", 3/4", 1/2" female and male thread connection.
   * Also referred to as: Flood Jet Nozzle, Wide-angle spray nozzle.

Deflected Jet Spray Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Siphon Round Air Atomizing Nozzle

The Round Air Atomizing Nozzle produces a round or cone spray area, and siphon type nozzle only needs a low pressure or no pressure, it can inhale the liquid below 1 meter by air siphon principle.

If the siphon air atomizing nozzle is installed a higher height, even over 1.5 meter, so it can't inhale the liquid, and need to be supplied a pressure 1-2bar, if you can connection it with tap water, it would be better. 

Spiral Jet Spray Nozzles

Nozzle Descriptions:
The Spiral Jet Spray Nozzles deliver a full cone and hollow spray pattern with spiral spray angles ranging from 60  to 170 degree at 0.7 bar.
The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bar.

These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

Spiral Jet Spray Nozzles work on the impact principle, by deflection of a water stream onto a spiral profiled surface which provides the desired spray angle.

The spray angle value is maintained even at low pressure and when spraying high viscosity liquids.
These nozzles can be installed on and replaced from most pipe systems.

Available materials are in brass, 316stainless steel and TEFLON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.  
Design Features:
  * Nozzle Materials: Brass, 303, 316 stainless steel, Teflon/PTFE, PVC, PP,Ceramics,SiC
  * Nozzle Structure: one-piece construction no internal parts;
  * Spray Patterns: full cone spiral and hollow cone spiral spray;
  * Spray angles: from 60 to 170 degree;
  * Pressure Range: 0.7 to 25 bar (2.6 to 11960 L/min);
  * Inlet connection Type: 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 3", 4";
  * Thread Standard: available in type NPT or BSPT male, female and flange connection;
  * Also referred to as: Spiral Jet, Pigtail Nozzles, Twister Nozzle, Sprinkler Head, Whorl Nozzle and Twist Jet Nozzle.