Over million Products, Wholesale Price, Small Purchase Order Available, Ultra-fast Shipping

RELAB's Products around more than 30 countries and regions, including UK, Germany, Greece, Poland, USA, Canada, Korea, Japan, Indonesia, India, Russia, etc.
Flat Fan Nozzle, Full Cone Nozzle, Hollow Cone Nozzle, Straight Jet, Sprial Nozzle, Square Nozzle, Air Atomizing Nozzle, Cluster Mist, Fog Nozzle, Eductor
Nylon Tubing, PE Tubing, Threaded Coupling, Quick Coupling, Tee, Elbow, Adjustable ball, Ball valve, swivel joint, switching head, Cluster head, Adapter
Brass, Nickel Plated Brass, SUS303, SUS304, SUS316, SUS316L, PP, PVC, POM, PVDF, PTFE, Ceramic, Ruby, Tungsten Rlloy, SISIC/Silicon Carbide
Cleaning, Wahing, Cooling, Misting, Fogging, Humidifying, Coating, Planting, Spray Drying, Fuel Burning, Dust Controlling, Fire Fighting

Spray Dry Nozzle

spray dry nozzle consists of stainless steel nozzle body and inlaid hardened stainless stell, alloy or gemstone orifice with a single inlet spiral whirl chamber.

The liquid flowing through the guide vane at high pressure forms a centrifugal hollow chisel with very fine droplet.

Applications are in such industries as food, ceramics, pharmaceutical, chemical products, dyestuff, metallurgy, etc. It resists high temperature wind, thus widely used in spay drying equipments.

Spray Dry Nozzle

spray dry nozzle consists of stainless steel nozzle body and inlaid hardened stainless stell, alloy or gemstone orifice with a single inlet spiral whirl chamber.

The liquid flowing through the guide vane at high pressure forms a centrifugal hollow chisel with very fine droplet.

Applications are in such industries as food, ceramics, pharmaceutical, chemical products, dyestuff, metallurgy, etc. It resists high temperature wind, thus widely used in spay drying equipments.

Spray Dry Nozzle

spray dry nozzle consists of stainless steel nozzle body and inlaid hardened stainless stell, alloy or gemstone orifice with a single inlet spiral whirl chamber.

The liquid flowing through the guide vane at high pressure forms a centrifugal hollow chisel with very fine droplet.

Applications are in such industries as food, ceramics, pharmaceutical, chemical products, dyestuff, metallurgy, etc. It resists high temperature wind, thus widely used in spay drying equipments.

Spray Dry Nozzle

spray dry nozzle consists of stainless steel nozzle body and inlaid hardened stainless stell, alloy or gemstone orifice with a single inlet spiral whirl chamber.

The liquid flowing through the guide vane at high pressure forms a centrifugal hollow chisel with very fine droplet.

Applications are in such industries as food, ceramics, pharmaceutical, chemical products, dyestuff, metallurgy, etc. It resists high temperature wind, thus widely used in spay drying equipments.

Axial-flow Hollow Cone Nozzle

Axial-flow Hollow Cone Nozzle
More Details......

Flood Jet Spray Nozzles

Nozzle Descriptions:
Flood Jet Spray Nozzles produce a wide, flat fan jet pattern with uniform distribution and medium impact spray droplets.

They feature a precision-machined deflector surface which provides dependable, accurate control of deflection and spray angle.

The one-piece design resists clogging due to a large, unobstructed flow passage and round orifice.

Flood Jet Spray Nozzles can also be suited to spray air and steam.

Flood Jet Spray Nozzles are also available in the interchangeable tip form, and can be assembled in Uni-jet nozzle.

Design Features:
   * Nozzle Materials: 303/304 stainless steel, and brass.
   * Nozzle Structure: one-piece construction no internal filter parts.
   * Spray Patterns: Flat fan spray.
   * Spray angles: from 40 to 110 degree.
   * Pressure Range: 0.2 to 10 bar (0.44 to 60 L/min).
   * Inlet connection Type: 1/8", 3/8", 1/4", 3/4", 1/2" female and male thread connection.
   * Also referred to as: Flood Jet Nozzle, Wide-angle spray nozzle.

Siphon Round Air Atomizing Nozzle

The Round Air Atomizing Nozzle produces a round or cone spray area, and siphon type nozzle only needs a low pressure or no pressure, it can inhale the liquid below 1 meter by air siphon principle.

If the siphon air atomizing nozzle is installed a higher height, even over 1.5 meter, so it can't inhale the liquid, and need to be supplied a pressure 1-2bar, if you can connection it with tap water, it would be better. 

Spiral Jet Spray Nozzles

Nozzle Descriptions:
The Spiral Jet Spray Nozzles deliver a full cone and hollow spray pattern with spiral spray angles ranging from 60  to 170 degree at 0.7 bar.
The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bar.

These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

Spiral Jet Spray Nozzles work on the impact principle, by deflection of a water stream onto a spiral profiled surface which provides the desired spray angle.

The spray angle value is maintained even at low pressure and when spraying high viscosity liquids.
These nozzles can be installed on and replaced from most pipe systems.

Available materials are in brass, 316stainless steel and TEFLON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.  
Design Features:
  * Nozzle Materials: Brass, 303, 316 stainless steel, Teflon/PTFE, PVC, PP,Ceramics,SiC
  * Nozzle Structure: one-piece construction no internal parts;
  * Spray Patterns: full cone spiral and hollow cone spiral spray;
  * Spray angles: from 60 to 170 degree;
  * Pressure Range: 0.7 to 25 bar (2.6 to 11960 L/min);
  * Inlet connection Type: 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 3", 4";
  * Thread Standard: available in type NPT or BSPT male, female and flange connection;
  * Also referred to as: Spiral Jet, Pigtail Nozzles, Twister Nozzle, Sprinkler Head, Whorl Nozzle and Twist Jet Nozzle.

Fine Fogging Nozzle

Nozzle Descriptions:
Fine Fogging Nozzle is an ideal fog maker nozzle for cooling and humidifying in outdoor, indoor, garden, piazza, verandah, barn, factory, etc.

Fine Fogging Nozzles consist of nozzle body, spray tip, an O-ring seal, a leak-proof device.

Design Features:
  * Nozzle Materials: stainless steel, brass and plated brass.
  * Nozzle Structure: United constructions with a anti-drip device.
  * Spray Patterns: fine spray.
  * Spray angles: from 45 to 90 degree
  * Pressure Range: 20 to 100 bar (0.0125 to 0.24 L/min)
  * Inlet connection Type: 10/24" male thread connection.
  * Also referred to as: FineJet Nozzle, Fog Nozzle, Mist Nozzle.