Over million Products, Wholesale Price, Small Purchase Order Available, Ultra-fast Shipping

RELAB's Products around more than 30 countries and regions, including UK, Germany, Greece, Poland, USA, Canada, Korea, Japan, Indonesia, India, Russia, etc.
Flat Fan Nozzle, Full Cone Nozzle, Hollow Cone Nozzle, Straight Jet, Sprial Nozzle, Square Nozzle, Air Atomizing Nozzle, Cluster Mist, Fog Nozzle, Eductor
Nylon Tubing, PE Tubing, Threaded Coupling, Quick Coupling, Tee, Elbow, Adjustable ball, Ball valve, swivel joint, switching head, Cluster head, Adapter
Brass, Nickel Plated Brass, SUS303, SUS304, SUS316, SUS316L, PP, PVC, POM, PVDF, PTFE, Ceramic, Ruby, Tungsten Rlloy, SISIC/Silicon Carbide
Cleaning, Wahing, Cooling, Misting, Fogging, Humidifying, Coating, Planting, Spray Drying, Fuel Burning, Dust Controlling, Fire Fighting

Fixed Tank Washing Nozzle

Fixed Tank Washing Nozzles can thorough cleaning various dimensions of tanks and vessels. 
With 13 full cone spray nozzles, they offer complete spray coverage of the whole interior surface of the tanks at pressures up to 4bar. 

The Fixed Tank Washing Nozzle assembly features a large flow capacity for cleaning tanks up to 3.1 meters in diameter. 
The flow rates can be changed by using 1/4 inch or 3/8 inch full cone spray nozzle. The nozzle can pass through tank mouth of 130mm of larger in diameter.

Design Features:
  * Nozzle Materials: 316ss, brass.
  * Nozzle Structure: Multi-piece construction with 13 piece full cone nozzle.
  * Spray Patterns: Full cone spray.
  * Spray Angles: from 51 to 86 degree
  * Flow Rates: from 35 to 230 L/min (1.5 to 3.5bar)
  * Inlet connection Type: 1-1/2" female thread.
  * Also referred to as: Multiple Tank Cleaning Nozzle, Cluster Tank Washing Nozzle.

Fixed Tank Washing Nozzle

Fixed Tank Washing Nozzles can thorough cleaning various dimensions of tanks and vessels. 
With 13 full cone spray nozzles, they offer complete spray coverage of the whole interior surface of the tanks at pressures up to 4bar. 

The Fixed Tank Washing Nozzle assembly features a large flow capacity for cleaning tanks up to 3.1 meters in diameter. 
The flow rates can be changed by using 1/4 inch or 3/8 inch full cone spray nozzle. The nozzle can pass through tank mouth of 130mm of larger in diameter.

Design Features:
  * Nozzle Materials: 316ss, brass.
  * Nozzle Structure: Multi-piece construction with 13 piece full cone nozzle.
  * Spray Patterns: Full cone spray.
  * Spray Angles: from 51 to 86 degree
  * Flow Rates: from 35 to 230 L/min (1.5 to 3.5bar)
  * Inlet connection Type: 1-1/2" female thread.
  * Also referred to as: Multiple Tank Cleaning Nozzle, Cluster Tank Washing Nozzle.

Fixed Tank Washing Nozzle

Fixed Tank Washing Nozzles can thorough cleaning various dimensions of tanks and vessels. 
With 13 full cone spray nozzles, they offer complete spray coverage of the whole interior surface of the tanks at pressures up to 4bar. 

The Fixed Tank Washing Nozzle assembly features a large flow capacity for cleaning tanks up to 3.1 meters in diameter. 
The flow rates can be changed by using 1/4 inch or 3/8 inch full cone spray nozzle. The nozzle can pass through tank mouth of 130mm of larger in diameter.

Design Features:
  * Nozzle Materials: 316ss, brass.
  * Nozzle Structure: Multi-piece construction with 13 piece full cone nozzle.
  * Spray Patterns: Full cone spray.
  * Spray Angles: from 51 to 86 degree
  * Flow Rates: from 35 to 230 L/min (1.5 to 3.5bar)
  * Inlet connection Type: 1-1/2" female thread.
  * Also referred to as: Multiple Tank Cleaning Nozzle, Cluster Tank Washing Nozzle.

Fixed Tank Washing Nozzle

Fixed Tank Washing Nozzles can thorough cleaning various dimensions of tanks and vessels. 
With 13 full cone spray nozzles, they offer complete spray coverage of the whole interior surface of the tanks at pressures up to 4bar. 

The Fixed Tank Washing Nozzle assembly features a large flow capacity for cleaning tanks up to 3.1 meters in diameter. 
The flow rates can be changed by using 1/4 inch or 3/8 inch full cone spray nozzle. The nozzle can pass through tank mouth of 130mm of larger in diameter.

Design Features:
  * Nozzle Materials: 316ss, brass.
  * Nozzle Structure: Multi-piece construction with 13 piece full cone nozzle.
  * Spray Patterns: Full cone spray.
  * Spray Angles: from 51 to 86 degree
  * Flow Rates: from 35 to 230 L/min (1.5 to 3.5bar)
  * Inlet connection Type: 1-1/2" female thread.
  * Also referred to as: Multiple Tank Cleaning Nozzle, Cluster Tank Washing Nozzle.

Rotating Tank Washing Nozzle

For small to medium vessels cleaning, you can't beat the Rotating Tank Washing Nozzles series.

The combination of flat fan nozzles and the rotating action gives a gentle, thorough cleaning to the entire interior with no gaps in the coverage.

Polished stainless steel construction resists contaminant buildup.

Self flushing bearings and self draining heads permit permanent installation in many cases.

Siphon Round Air Atomizing Nozzle

The Round Air Atomizing Nozzle produces a round or cone spray area, and siphon type nozzle only needs a low pressure or no pressure, it can inhale the liquid below 1 meter by air siphon principle.

If the siphon air atomizing nozzle is installed a higher height, even over 1.5 meter, so it can't inhale the liquid, and need to be supplied a pressure 1-2bar, if you can connection it with tap water, it would be better. 

Spiral Jet Spray Nozzles

Nozzle Descriptions:
The Spiral Jet Spray Nozzles deliver a full cone and hollow spray pattern with spiral spray angles ranging from 60  to 170 degree at 0.7 bar.
The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bar.

These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

Spiral Jet Spray Nozzles work on the impact principle, by deflection of a water stream onto a spiral profiled surface which provides the desired spray angle.

The spray angle value is maintained even at low pressure and when spraying high viscosity liquids.
These nozzles can be installed on and replaced from most pipe systems.

Available materials are in brass, 316stainless steel and TEFLON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.  
Design Features:
  * Nozzle Materials: Brass, 303, 316 stainless steel, Teflon/PTFE, PVC, PP,Ceramics,SiC
  * Nozzle Structure: one-piece construction no internal parts;
  * Spray Patterns: full cone spiral and hollow cone spiral spray;
  * Spray angles: from 60 to 170 degree;
  * Pressure Range: 0.7 to 25 bar (2.6 to 11960 L/min);
  * Inlet connection Type: 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 3", 4";
  * Thread Standard: available in type NPT or BSPT male, female and flange connection;
  * Also referred to as: Spiral Jet, Pigtail Nozzles, Twister Nozzle, Sprinkler Head, Whorl Nozzle and Twist Jet Nozzle.

Tangential Hollow Cone Nozzle

Nozzle Descriptions:
Hollow Cone Spray Nozzles feature a standard hollow cone spray pattern with a round impact area.
Uniform spray distribution is dropped in high flow rate and pressure with unobstructed flow passage and superior spray control design.

Various spray angles are delivered in different pressure. The broad range of orifice diameter can be chose in the performance data table.

They are ideal for applications requiring good atomization of liquids at lower pressure.

For a standard hollow cone spray nozzle, it is suitable for a variety of washing and spraying applications in surface treatment, electronics, environmental protection, steel and car etc.

Design Features:
  * Nozzle Materials: 303,304, 316 stainless steel, brass.
  * Nozzle Structure: one-piece construction with a special whirl chamber
  * Spray Patterns: Hollow cone spray
  * Spray angles: from 51 to 86 degree
  * Pressure Range: 0.2 to 7 bar (0.16 to 72 L/min)
  * Inlet connection Type: 1/8", 1/4", 3/8" and 1/2" female and male thread.
  * Standard Thread: Available in male and female thread connection.
  * Also referred to as: WhirlJet Nozzle, Hollow Cone Nozzle, Tangential/Right-angle Nozzle, Offset Spray Nozzle.

Mixing Eductor

Mixing Eductors are used to agitate or mix Liquids stored in tanks, pits, or sumps.

Mixing Eductors use a unique venturi design which enables smaller pumps to circulate large volumes of tank solution.

Designed on the basis of the Bernoulli theory, fluid under pressure is pumped into the nozzle through its large flow opening.

As the liquid exits the nozzle at high velocity, it draws surrounding solution through the nozzle's "flow-through" chamber that's designed to eliminate internal material build-up.

They are static mixers that can be used to mix, blend different liquids together in a tank, or simply maintain a homogeneous mixture in a tank. They can also be used to mix or dissolve powders into liquids or to keep solid particles in suspension.

Mixing Eductors can often replace motor-driven mechanical agitators and avoid the maintenance associated with mechanical devices.

Design Features:

   * Nozzle Materials: PP (polypropylene), PVDF, 304SS.
   * Nozzle Structure: one-piece construction without internal parts.
   * Spray Patterns: Mixing Jet.
   * Spray angles: from 40 to 110 degree.
   * Pressure Range: 1 to 4 bar (20 to 127 L/min).
   * Inlet Thread: 1/4", 3/8", 1/2", 3/4".
   * Also referred to as: Jet Mixing, Jet Injection Nozzle, Turbomix Eductor, Mixer, Mixing Eductor Nozzle.