Plastic Spiral Nozzle

Plastic Spiral Nozzle

Nozzle Descriptions:

The Spiral Jet Spray Nozzles deliver a full cone and hollow spray pattern with spiral spray angles ranging from 60  to 170 degree at 0.7 bar.

The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bar.

These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

Spiral Jet Spray Nozzles work on the impact principle, by deflection of a water stream onto a spiral profiled surface which provides the desired spray angle.

The spray angle value is maintained even at low pressure and when spraying high viscosity liquids.
These nozzles can be installed on and replaced from most pipe systems.

Available materials are in brass, 316stainless steel and TEFLON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.  

Design Features:

  * Nozzle Materials: Brass, 303, 316 stainless steel, Teflon/PTFE, PVC, PP,Ceramics,SiC

  * Nozzle Structure: one-piece construction no internal parts;

  * Spray Patterns: full cone spiral and hollow cone spiral spray;

  * Spray angles: from 60 to 170 degree;

  * Pressure Range: 0.7 to 25 bar (2.6 to 11960 L/min);

  * Inlet connection Type: 1/4", 3/8", 1/2", 3/4", 1", 1-1/2", 2", 3", 4";

  * Thread Standard: available in type NPT or BSPT male, female and flange connection;

  * Also referred to as: Spiral Jet, Pigtail Nozzles, Twister Nozzle, Sprinkler Head, Whorl Nozzle and Twist Jet Nozzle.

Technical Parameters of Plastic Spiral Nozzle:

The Spiral Nozzle produces a solid cone spray pattern with spray angles ranging from 60 to 170degree. The liquid flow rate range form 5.5 liters per minute to 4140 liters per minute at 3 bars. These compact nozzles permit maximum liquid throughput for a given pipe size, and the free passage design minimizes clogging.

These nozzles can be installed on and replaced from most pipe systems. They are available in brass, 316stainless steel and TEFON for 1/4 to 2 inch inlet connection sizes. Other materials are available in case of application in some special fields.

Typical Applications of Plastic Spiral Nozzle:

• 1. Flue Gas Washing;
• 2. Gas Cooling;
• 3. Washing and Rinsing;
• 4. Fire Prevention & Fire Suppression.

Ordering Informations of Plastic Spiral Nozzle: