Air Atomizing Nozzles

Air Atomizing Nozzles

The Siphon Type Air Atomizing Nozzles have two spray patterns, i.e."flat fan spray" and "round spray". Each spray set-up consists of an air cap and fluid cap.
The Air Atomizing Nozzle has two holes, one for air inlet, and one for liquid inlet, it delivers an unique internal design that makes it possible for the liquid and air to mix internally producing a fine or coarse drops atomized spray.

Basically, obtaining fine atomization is done by increasing the air pressure or lowering the liquid pressure, resulting in a high ratio of air flow rate to liquid flow rate.

The Air Atomizing Nozzles have two types of adjustable and nonadjustable.
They can produce effective spray by adjusting flow rates without changing air and liquid pressure, thus the nozzles can be used in various environments.

The nozzle can get the liquid by gravity or siphon. so The Siphon type Air Atomizing Nozzle can be worked at a lower pressure below 1.5 bar or no pressure.

Design Features:
  * Material: brass, stainless steel, Plastic
  * Nozzle Structure: seven-piece construction.
  * Spray Patterns: round spray and flat fan spray.
  *  Fluid Mixing Type: Internal mixing(general fluid)
   * Modes of Liquid Supply: Siphon liquid supply    
   * Also referred to as: Atomizer, Air Atomized Nozzle, Air Mist Nozzle

Technical Parameters of Air Atomizing Nozzles:

The Air Atomizing Nozzle has three spray patterns, including "wide angle round spray", "flat fan spray" and "round spray". They are different features. 

Parts and types of Air Atomizing Nozzle: 


 Round spray pattern: 
  
For the round spray pattern, angle "A" is maintained throughout distance "B". Beyond "B", the spray becomes turbulent and will project out to distance "D" as shown.

Typical Applications of Air Atomizing Nozzles:

 wool praying and moistening, mould lubrication, spraying injection, air disinfecting

Please click the link to contact us: Inquire the product!