Ultrasonic Atomizer
Ultrasonic Atomizier produces a finest spray available with air assistance for industrial proceses, with a narrow angle full cone pattern.
Water and air do not mix in a confined volume before leaving the nozzle and therefore their feed pressures can be adjusted independently without influencing each other: this allows for a very wide regulation range on the liquid capacity and makes it easier to reach the desired operating conditions.
Water Flow rate: 0.3L/min at 1 bar
Air Capacity: 5-10 CFM/141.5LPM-283.0LPM at 5-7bar
Principal of Operation
The principal of operation is based on the probability of like-sized water and dust particles colliding, agglomerating, and growing in size and mass. As the agglomerates become larger and heavier, they settle back onto their source where they are carried through the process without any special handling. When water droplets are significantly larger than dust particles, the air displaced by the moving water droplet conveys the dust particle around the water droplet preventing collision.
Typical Applications of Ultrasonic Atomizer:
Dust Control System
FAQs
Flat Fan Siphon Air Atomising Nozzle
Anti-drip and Adjustable Air Atomizer
Clog-resistance Cone Air Atomizing Nozzle
Viscous Liquid Mist Nozzle
Siphon Type Air Atomized Nozzle
Gravity-fed Air Atomization Nozzle
Pneumatic Atomizing Nozzle
Siphon-fed Air Atomizing Nozzle
Double-jet Round Air Atomizing Nozzle
External mixing air-water mist nozzle
Wide Round Air Atomizing Nozzle
Non-adjustable Air Mist Nozzle